Ships With in 3 working Days
Important Information for Using Our Transfers
-
Size: These transfers are 10-12 inches wide for Adult Size and about 7-9 inches wide on Youth and about 5-7 inches wide on Toddler.
-
Press Size Requirement: A 15x15 inch or larger heat press is necessary.
-
Refund Policy: We do not offer refunds based on the size of our transfers.
Instructions for Best Results:
-
Trimming: Trim around your design before pressing to ensure no ink remains on the edge of the page.
-
Material: Use an item that is at least 65% polyester (the higher, the better). Choose white or light-colored fabrics, as sublimation does not print white. White areas in your graphic will appear as the shirt color.
-
Heat Press Settings:
- Temperature: 385-400°F (lower temperature for higher cotton content).
- Preheat the garment for 5-10 seconds to remove wrinkles and moisture.
-
Preparation:
- Place parchment paper inside the shirt at the transfer location if threading over the lower heat platen is not possible. This prevents bleed-through.
- Position the transfer in the desired location and use heat tape if needed.
- Cover the transfer with parchment (baking or butcher) paper. Do not use Teflon.
-
Pressing:
- Apply medium pressure for 60-70 seconds, depending on your heat press.
- Open the press slowly to prevent ghosting. Carefully remove the transfer while hot.
-
Cooling and Washing:
- Allow the design to cool completely before wearing.
- Wash on cold and tumble dry low or hang dry.
Follow these steps to achieve the best results with our transfers!
