Cut Settings: Generally this film can be cut on the same settings as other standard adhesive vinyl films. We do recommend small test cuts and adjusting pressure accordingly and as required.
Transfer Tape is needed to lift the design or pattern from the kraft paper backer to your sign, cup, wall, car window, etc. CLICK HERE for Transfer Tape.
Note: The Life expectancy of this Holographic Glitter Adhesive Permanent Vinyl can vary depending on the harshness of UV exposure.
Cut Limitations: Due to the stiffness of the film, smaller intricate cuts may be difficult to weed and work with, as well as have a lower tolerance for lifting from the surface after applied. We do not recommend sharp corners or edges as these may perpetuate peeling from the surface, especially if handled.
Tunneling: Due to the stiffness of the film, when unrolled "tunneling" may occur which is when the film lifts from the release liner and bubbles or "tunnels" form. This can be corrected by simply lifting the film gently from the release liner and gently using a squeegee or other flat edge to lay the film back down prior to cutting.