Sublimation Transfer-Oversize

Most of these transfers exceed 12" x 12". Most will be a max of 14" x 14"

It is STRONGLY recommended to trim around your design before pressing. This will ensure no ink is on the edge of the page.
Choose an item that is at least 65% polyester (the higher the better) white or light-colored (sublimation does not print white so to get white in your graphic you must use a white shirt; any white area of the graphic will be the color of the shirt)
Set your heat press at 385-400 degrees F (lower temp for the higher cotton count)
Preheat garment for 5-10 seconds to remove wrinkles and moisture
Place parchment paper inside the shirt in the location of the transfer if your shirt can not be threaded over the lower heat platen. (Prevents bleed through)
Place transfer in the desired location; use heat tape to hold in place if needed
Cover with parchment (baking/butcher) paper (DO NOT USE TEFLON)
Press using medium pressure for 60-70 seconds depending on your heat-press.
Open press slowly to prevent ghosting and carefully (it will be HOT) remove the transfer.
Ready to wear once the design is completely cool.
Wash on cold and tumble dry low or hang dry.

*DUE TO THE NATURE OF THIS ITEM WE DO NOT ACCEPT REFUNDS, RETURNS, OR EXCHANGES

Sarcastic Transfers